← Volver a la categoría Control de procesos y automatización

El controlador multifunción cuenta con conectividad Ethernet para una operación simplificada

Escriba el controlador 8619 multiCELL

The Type 8619 multiCELL controller from Burkert is a popular choice for delivering multi-channel measurement and control for a range of sensors. Now the benefits for process control systems have been extended with the addition of Ethernet connectivity, which will reduce installation time and greatly improve the connectivity of the control network.

With direct connection of a wide range of sensors to measure parameters such as flow rate, pH, ORP, temperature and conductivity, the multiCELL is ideally suited to the control and monitoring of water quality in industrial processes. Designed to provide flexibility and an easy-to-use interface, the multiCELL can be easily configured to suit a wide range of process control systems.

As more and more control systems start to integrate Ethernet communications, so Burkert is adding this important communication tool to many of its products. The continued implementation of this technology is making it considerably easier to install and operate process control infrastructure.

The initial product release by Burkert will enable communication using Modbus TCP and this will be shortly followed by the introduction of PROFINET and Ethernet/IP capability. This will greatly simplify the connection between the multiCELL and the PLC as well as removing the need for an additional I/O card in the PLC.

multiCELL adaptability

The adaptability and versatility of the multiCELL allows it to be integrated into a variety of applications.

Built-in flexibility

Each controller can be configured for a range of sensors as well as having up to six pre-configured I/O boards to accommodate any signal requirements. In addition, the multiCELL can be configured as a datalogger, using the built-in SD card slot for data storage.

This SD card slot can also be used to save sensor parameters and control application settings to allow the same settings to be replicated in another multiCELL controller; ensuring accurate transfer of control parameters between sites.

La sofisticada electrónica y los algoritmos de control de última generación aseguran que el control óptimo del proceso se mantenga en todo momento con la mínima intervención del operador. Las bombas de dosificación química o las válvulas de control se pueden controlar a través de señales de pulso, encendido / apagado o analógicas, dependiendo de la aplicación en cuestión. La adaptabilidad y versatilidad de multiCELL le permite integrarse en una variedad de aplicaciones, desde diseños muy simples a diseños más complejos.

Monitoring and maintaining water quality within an industrial process requires an array of sensors, flowmeters, pumps and control valves. By introducing the highly functional multiCELL, all of these components can be easily configured with parameters being set at the touch of a button.

In many cases, maintaining precise control over the quality of water within a process is a fundamental requirement. At the same time, improved communication and flexibility can go a long way to reducing down-time and maintenance costs.

Kirsty Anderson
Sistemas de control de fluidos Burkert
Centro de control de fluidos, 1 Bridge End, Cirencester, Gloucestershire, GL7 1QY, Reino Unido
Tel: + 44 (0) 1285 648761 Fax: + 44 (0) 1285 648721
Web: www.burkert.co.uk
E - mail: book.equilibrium@gmail.com

Sistemas de control de fluidos Burkert

Fabricación de equipos de proceso. Uno de los pocos fabricantes que ofrece soluciones para el circuito de control completo.

Firma: membresía Gold

Noticias relacionadas

Deje un comentario.

Su dirección de correo electrónico no será publicada. Los campos necesarios están marcados *

Este sitio usa Akismet para reducir el correo no deseado. Descubra cómo se procesan los datos de sus comentarios.